4506 Whirl Cruiser & Geminator

FOLLOWERS

13

LIKES

The first model was the Whirl Cruiser. It began with the rotating head as I was playing with ideas. From there I wanted to see what I could build around it. This quickly followed with the decision to use a double set of wings next to the head. This seemed like the way to go. From there I gradually extended the build. I wanted to keep a decent color scheme and avoid using some of the colors, so I decided to not extend the model much beyond the wings. There was however a bit of gap and I thought it might be interesting to use the hinge plates. After that I finished the main body before I played with ideas to expand the hinge plates. As these were on the edge of the tip of the wings I had to build something backwards. As this would weaken any construction I had to reinforce it while still making it look good. With that done I was satisfied with the result. A bit of an odd model but it has plenty of charms.

For the Whirl Cruiser I had not used any of the transparent reflectors so I thought I could perhaps make another model from the remaining parts, which would focus on light grey and red parts. There were still some wing plates left but oddly enough I did not use them as such at the start. At first it started similar to the Hunter model, so I looked for a way to do something very different. I used the sideways plates to shape the outside but the inside was still open. What I did next was trying to fill up the open part behind the front section, step by step fitting in parts that would form a nice shape. The two outer sections and the central one were not very strong and could easily fall off so I started looking for a way to connect them. That took some time to figure out as the sideways plates had shifted the outer sections for half a plate width and there seemed to be no parts that could cross that gap until I realized I had another pair of sideways plates. I only needed to find the right spot to fit them in. Once I had succeeded in adding them the model had become very strong. After that I improved the design where I could, changing some parts here and there. I did not have much of an idea of what kind of model it was supposed to be and what kind of name would be fitting. Geminator is simply a word I derived from a word I found.

I like being able to create multiple good-looking models from one set as it improves the playability. This pair consists of two very different models but they should be able to operate in the same environment.
Login to hide ads!

MOC-22376

Name 4506 Whirl Cruiser & Geminator
Designer drosse
Designed 2019
Parts 221
Theme Designer Sets
Alternate Build of 4506-1 Deep Sea Predators
Already have some of the parts? Use the Build this MOC page to only show the parts you are missing.
Create an account to change the default filters used.

Waiting for Inventory to load

Use LEGO Digital Designer to open these files and generate step by step building instructions.